ROLLING

implementation of bar and screw rolling

Rolling consists of threading bars and screws using plastic deformation with cold steel.

 

This process not only guarantees the highest quality and precision, with the same results of classic threading however without chip formation, at decisively more advantageous costs and with an excellent level of finishing with ensured compliance with the tolerance requested.

 

“Rollable” raw material is essential for good rolling, meaning it must be suitable for deformation.

 

Gabrieletto Meccanica avails of a warehouse equipped with suitable tools for the manufacture of different types of rolled profiles, state of the art machinery and qualified staff capable of providing consultancy for the client.

 

MACHINED PRODUCTS
 

rolled bars

rolled worm screws

sleeves

  • shaft rolled diameter 16 principles 10 length 242
  • Vite senza fine modulo 1.5 diametro 16.78 rullata
  • Vite senza fine modulo 1.25 diametro 14 rullata
  • Vite senza fine modulo 1.75 diametro 28 rullata
  • Vite senza fine modulo 1.75 principi 2 diametro 20 rullata
  • Vite senza fine modulo 2.75 diametro 28 rullata
  • Barra rullata TPN12 passo 6 principi 2
  • Barra rullata M6X1 principi 2 inox
  • Vite senza fine modulo 1.25 diametro 17 rullata
  • Vite senza fine modulo 1 diametro 12 rullata
  • Vite senza fine modulo 3 diametro 42.2 rullata
  • Vite senza fine modulo 2 principi 2 diametro 26 rullata
  • Manicotto vite senza fine modulo 1.75 diametro 34.85 rullata

ADVANTAGES OF ROLLING

  • HIGH PRECISION

    • The highest quality with an excellent level of finishing at advantageous costs compared to threading

  • HIGH REPETITION

    • The rolled threads profile is extremely precise and therefore there is no difference among parts

  • LITTLE ROUGHNESS

    • The sides of the threads have roughness equal and better than a ground surface

  • LITTLE WEAR

    • Smoothing of the surface reduces friction with less working strain and absorption

  • STRONGER

    • Increased material strength by hardening the sides of the thread where the load is heaviest

  • QUIETER

    • Greater silence of the motor or the reducer on which the rolled bar is assembled